How to choose a suitable flat press tester for cor

2022-08-10
  • Detail

How to choose a suitable corrugated paperboard flat compression tester

how to choose a suitable corrugated paperboard flat compression tester

Liu Yanlong, Secretary General of China chemical and physical power industry association, said

Dongguan Haida Instrument Co., Ltd. "beverage standard packaging is a typical class 1 low value-added waste/

first, confirm what tests to do: edge compression test (corrugated paper), ring compression test (base paper, kraft paper), flat compression test (corrugated paper) Adhesion test (corrugated paper) theorem (base paper, kraft paper)

Second, confirm the fixtures required for various tests:

edge pressure test: sampling 100*25mm, need to be equipped with edge pressure sampling knife,

ring pressure test: sampling 152*12.7mm. Ring pressure sampling knife shall be equipped, and horizontal pressure test shall be carried out with 13 ring pressure center plates

: horizontal pressure sampler shall be equipped

adhesion test: sample: 80*25mm; 50*150mm, need to be equipped with a flat pressure sampling knife and a bonding fixture (a, the current data shows B and C ridges)

quantitative sampling: diameter: 112.8mm, I do not need to be equipped with a machine, take out the test, weigh

this article comes from the network, and the copyright belongs to the original author. It is only for everyone to share and learn. If the author believes that infringement is involved, please contact us, and we will delete it immediately after verification in actual work

Copyright © 2011 JIN SHI